Posts Tagged ‘bind9’

We need:

  1. One Vanilla Installation of Ubuntu 10.0 (any version should still work fine)
  2. Machine with enough hard disk space (i used about 10gb for a NON-production testing only machine)
  3. A working internet connection

Lets get started.

*quick note, i have a GUI installed in this box (XFCE) this is absolutly NOT necessary (and most of the time NOT recommended for actual servers)

Set up your Server’s Hostname properly:

to view your current hostname: cat /etc/hostname

cat is a util used to print text out to standard out from a text file. /etc/hostname is where the hostname of the computer is stored.

Viewing Hostname

How to View your Hostname

To set a Host-name simply:

echo “YOUR-HOST-NAME-HERE” > /etc/hostname

echo is a program to repeat what you types into standard out. The “>” sign is for porting information in linux. Here we port that information into the file “/etc/hostname”

How to set the Host-name in your Computer

Setting a custom host-name in your Computer

Set your Domain preferences:

to view your current settings:    cat /etc/resolv.conf

to set a new domain:    echo “domain geek.local” > /etc/resolv.conf

Viewing and Setting your Resolv.Conf

Setting up your Network Settings:

Now normally, in a real life situation you’d have a Static IP for your DNS server (this isnt a recommendation this is a MUST). However, personally i’m setting this up on a Vritual Machine, which means i have to switch between  connecting the server to my REAL network and to my virtual network. What does this mean for us? We basically need to be a wizzz at changing your network settings on the fly!

Here’s the quick Run down:

Viewing your Current Network Settings:

ifconfig -a

This will basically show you all your currently set network settings. Dont get confused by the “lo” interface. That’s the local loop interface in Linux.

Viewing your Network configurations

To set a static IP on your network interface:

ifconfig <interfacename> <ip-address> netmask <network-mask/subnet mask>

eg. ifconfig eth0 netmask

Setting a Static IP for a selected Network Interface

To get IP settings automatically from a DHCP server

dhclient <interface-name>

e.g. dhclient eth0

Getting down Network Configuration settings from a DHCP server

Installing BIND9 and other Necessary Tools

1. Make sure your server is connected to the internet

2. sudo apt-get update

sudo apt-get update

3. sudo apt-get install bind9 dnsutils

Installing BIND9 & DNSUTILS

If everything went well, you should see this message:


Setting up Forward-look-up files and reverse look-up files will be posted shortly!